Anytron laser die-cut, any-cut II is the most compact size among the A3 laser cutting machines. It is post-processing equipment for roll-to-roll type of small batch label printing. You can cut labels using a laser by controlling via desktop PC. In addition, it has functions of laminating, coating, and scrap paper removal which greatly improves productivity. any-cut II has better features than any-cut I. It does not have an limitation on the location of the label, minimizing the loss of media and is cost-free for tooling, saving operating cost. any-cutII works best with digital label printer providing a more efficient and easy label printing system.

Features & Benefits

20,000 labels can be cut within one hour with no retooling.
Without retooling for cutting, 20,000 labels can be cut within one hour.
The combination of the latest laser technology and vision system guarantees the quality of labels.
Cutting can be performed at precise locations through a small laser beam and a vision system. In addition, consistent levels of label quality can be guaranteed by minimizing the errors that occur during cutting.
Time and costs can be reduced by performance that serves a triple purpose.
A single cutting can perform laminating and the removal of scrap paper simultaneously. Laminating films can increase durability by protecting the surface of labels and enhance the level of luster. In addition, final labels can be conveniently produced through the removal of scrap paper.
You will become an expert with only a short-term training.
Fast and easy cutting is realized through the simple installation of roll labels and our custom software.
Production is possible without concerns about space.
any-cut II does not require a large space. It can be installed in a small space and cutting can be done whenever necessary.
Cutting and marking can be performed simultaneously.
In cutting labels, necessary information such as barcodes, numbering, QR codes, date and time can be directly marked on the labels through an exclusive software program.
Full and half cuts can be performed simultaneously.
Various cutting tasks can be produced within a single label printing operation.
Various media in terms of thickness and type are supported.
As the laser can set up the degree of cutting by fine control of intensity and speed, labels can be cut in various patterns in the medium as desired by users.
Long labels can also be cut at one time.
Labels with a maximum length of 1.2m can also be cut by our software.
Labels with highly complex images can also be cut speedily.
Various images ranging from simple rectangles and circles to complex cuts such as stamp shapes can be executed easily and speedily.
Concerns over consumable costs such as the replacement of knife edges are no longer necessary.
In the case of die cutting using knives, the abrasion of knife edges requires frequent replacements. However, any-cut does not incur consumable replacement costs.

Specifications

MAX. WEB WIDTH

  • 350 mm

MAX. ROLL DIAMETER

  • Unwinder Ø500mm
  • Rewinder Ø400mm

CUTTING AREA

  • 300 x 300 mm

WORKING SPEED

  • 45m/min

LASER SOURCE

  • Sealed CO₂

AVERAGE POWER

  • ≥ 150 Watt

FOCUS SPOT SIZE

  • 270 um

COOLING

  • Water-cooled

LIFE OF LASER

  • 10,000hours typical

POWER SUPPLY

  • 380V x 3Ph x 50/60Hz

DIMENSIONS

  • L1700 x D800 x H1700 mm / 1200kg

POSSIBLE PROCESSES

  • Die-cut of labels
  • Die-cut of sheets
  • Half-cutting / full-cutting
  • Marking(Hatching)
  • Slitting
  • Progressive numbering